What comes in the package?
4 Straps (to secure two separate items)
Wall Screws x 4 - 6mm Diameter x 54mm Length
Furniture Screws x 8 - 5mm Diameter x 29mm Length
M8 x 4 - 8mm x 25mm
M8 x 4 - 8mm x 17mm
M6 x 4 - 6mm x 16mm
M5 x 4 - 5mm x 15mm
M4 x 4 - 4mm x 15mm
4mm Washers x 4
Can I use these just to secure a heavy wood dresser to the wall?
Yes - provided you screw straps into a wall stud NOT into plaster or wall board. We strongly suggest you pre-drill holes on the dresser to avoid splitting the wood, use a drill bit half the thickness of the screw. Secure straps to wall first, then the dresser and adjust straps accordingly.
I have a 75 inch TV, will this work?
Yes they will. The straps are approximately 39" in length and you need to allow at least two to three inches of strap to loop through the cam buckle so it will hold correctly. If the measurement from your VESA mounting holes to the spot you wish to anchor is less than 36" apart then yes.
Will these work for a 65 inch curved tv on a stand?
Yes they would if the VESA mounts on the TV are not high up on the TV. The straps are 39 inch long.
How does this screw to the tv?
Most TV's come with 2 or 4 VESA mount holes intended for TV stand or wall installation. Use the provided TV mount screws on the upper holes and attach the strap. Some TVs come with small plugs over the VESA mounts or with bolts already installed in them. See if the manufacturer has information on locating the VESA mounts on their website.
Do the straps help the tv from tipping backward?
They are intended to prevent the TV from tipping over forward.
Does it come with drywall anchors?
No they do not come with drywall anchors. You would have to buy at your local hardware store. The product requires installation into a wall stud or solid wood furniture. The screw mounts for the TV and screws for stud or furniture are included.
Can I use these on a tv stand made of glass?
The straps require a solid surface to drill into and anchor to. You can anchor them to a wall stud or to a solid wood piece of furniture. Hope this helps!
How long do the straps extend to?
The straps total length is approximately 39", however you will want a few inches looped through the cam buckle to have sufficient length of the strap to grip on. Just remember to loop the strap through the bottom of the cam buckle, the same way it arrives so that the cam buckle jaws will hold the strap correctly. You can test this by pulling the strap once inserted into the cam buckle, if the strap is not held when pulled (plate to plate) then loop the strap through the cam buckle the other way.
Does the media stand need to be made of solid wood for this to be sturdy enough? Can they be used with particle (mdf) board?
It is possible. Predrill holes in the mdf or particle board. Please be sure that the screws are not too wide, as it will spit the MDF. Use a 1/16 drll bit to predrill to prevent the MDF from splitting.
Where is this product manufactured?
It is Made in China.